← EV Auto Specialist
Tesla · Brisbane

Tesla ceramic coating and paint protection in Brisbane

Factory paint, locked in. Compare ceramic coating, paint protection film and tint for your Model 3, Model Y, Model S or Model X, with every price sized to the model. Coating happens at your place across Brisbane and surrounds; tint is taken as an advance enquiry for roughly early November, exact date and capacity to be confirmed; PPF is collected and returned.

Exact price for your model · 60 seconds
White Tesla Model 3 on the road
Pricing

Every Tesla, priced exactly.

These are real from-prices for each model — not a generic range. Open the instant quote to pick a package and lock the number for 14 days.

ModelCERAMICTINTPPF
Model 3Sedan / liftbackfrom $790from $390from $1,290
Model YMid-size SUVfrom $910from $440from $1,480
Model SLiftback sedan · priced in the Large SUV / ute classfrom $1,040from $490from $1,700
Model XLarge SUV · priced in the Large SUV / ute classfrom $1,040from $490from $1,700
Fixed, itemised, GST and travel included, held for 14 days — no obligation.
Cameras mapped, not assumed
Which sensors a Tesla carries depends on its build: newer cars run on cameras alone, older ones also have radar or ultrasonic parking sensors. We check what your car actually has, keep coating and film off the lenses and sensor faces, and leave the driver-assist software untouched.
Priced to the model, shown up front
Model 3, Model Y, Model S and Model X each price to their own size class in the quote engine. The number on screen is the number on the invoice, travel included, held for 14 days.
Ceramic for the sun and the washing, film for the chips
A coating resists UV and chemical etching and makes dirt, bugs and bird droppings easier to remove safely. It does not stop stone chips or scratches; paint protection film reduces the risk of chips and scratches on the panels it covers; nothing makes a car immune. We tell you which one your driving actually needs.
Services · Brisbane

Tesla ceramic coating and PPF in Brisbane

Three services, one inspection first. Ceramic coating is done at your home or workplace across Brisbane, Ipswich, Logan, Moreton Bay and Redlands; paint protection film is a collect-and-return job because film needs a controlled space; window tint is taken as an advance enquiry for roughly early November, exact date and capacity to be confirmed. Here is what changes from model to model.

Model 3

Priced as a sedan. The long, low bonnet and nose sit squarely in the stone-chip zone on the M1 and Gateway, so a Highway pack or full-front film pairs well with a coating for anyone doing highway kilometres. Side and rear glass can take a coating on the packages that include glass; the front windscreen stays untreated (see the glass note below).

Model Y

Priced as a mid-size SUV. The same front-end exposure as the Model 3 with more glass, including a one-piece rear screen, which is why tint on a Model Y is a job for an installer who has handled one before. We check how much tint the rear glass already carries before quoting film for it.

Model S and Model X

The Model S is a liftback sedan and the Model X a large SUV. Both price in our large-vehicle class because the price follows panel and glass area, not the badge; the table above says so against each model.

What we inspect before we quote the work

The quote engine prices the package. The inspection on the day confirms it, and these are the things that change what we do:

  • Paint condition: swirls, water-spot etching or prior correction decide how much machine work a coating needs first.
  • Any dealer-applied coating or sealant already on the car, which has to come off before a new coating will bond.
  • Camera and sensor layout for your build year, so coating and film stay off lenses and sensor faces.
  • Where the car will be done: a garage, carport or shaded driveway for coating, or a collection for PPF; tint is taken as an advance enquiry for roughly early November, exact date and capacity to be confirmed. If the site is not suitable we say so before the booking is locked in.
  • Factory tint on the rear glass, so we only quote film for windows that can legally take more.
  • Which glass and interior surfaces the owner manual allows us to treat on your model and year (windscreen always left untreated).

Glass and interior on a Tesla: what we coat and what we leave alone

On Teslas we follow the owner manual: side and rear glass can be coated; we leave the front windscreen untreated so the camera view is never affected, and we don't apply seat protectants. Glass and interior options are confirmed per model and year at booking.

Every ceramic package description on this site makes glass and interior coverage conditional on what the manufacturer allows. For a Tesla that means side and rear glass only. Tesla's Model Y owner manual (Australia) limits hydrophobic window coatings to the side and rear windows and warns against treating the windscreen; we have not confirmed the equivalent wording for Model 3, Model S and Model X, which is why the glass and interior scope is confirmed per model and year rather than assumed.

Ceramic coating or paint protection film?

A ceramic coating bonds to the clear coat and makes the surface harder for UV, bird droppings, bugs and road grime to damage, and far easier to wash safely. It does not stop stone chips or scratches; film reduces the risk of chips and scratches on the panels it covers; nothing makes a car immune. That is why highway-driven Teslas usually get film on the front and a coating over the whole car, film included.

Neither makes the car immune. Mineral-heavy water left to dry still leaves spots, and a coating does not make a neglected car clean itself. The difference is that contamination releases with less effort and the factory clear coat is not the layer taking the hit.

Model, then package, then your fixed price — no contact needed to read the comparison above.
Good to know

Questions Tesla owners ask.

Will ceramic coating or tint affect Autopilot, Sentry Mode or the cameras?

We keep coating and film off every camera lens and, on cars that have them, the radar and ultrasonic sensor faces, so the hardware sees what it saw before. We do not alter, calibrate or disable any driver-assist software. Which sensors your car has depends on its build year, and we check the actual car rather than assume.

What does ceramic coating cost for a Model Y in Brisbane?

Model Y ceramic packages run from $910 for Essentials to $2,060 for Graphene Ultimate, travel included and GST included. A Model 3 runs from $790 to $1,790; a Model S or Model X from $1,040 to $2,360. The instant quote shows the fixed figure for your model and holds it for 14 days.

Does a coating stop stone chips or water spots?

No. Stone chips go through a coating; paint protection film on the bumper, bonnet edge and mirrors reduces the risk of chips on the panels it covers, and nothing makes a car immune. Water spots can still form on a coated car if mineral-heavy water dries on it; the coating makes them far easier to remove before they etch, which is the point.

Where does the work happen?

Ceramic coating happens at your place, home or workplace, across Brisbane, Ipswich, Logan, Moreton Bay and Redlands; tint is taken as an advance enquiry for roughly early November, exact date and capacity to be confirmed. We need a garage, carport or shaded driveway and dry conditions for the coating to cure. If your site is not suitable we say so before the booking is locked in and arrange an alternative. PPF is collected, filmed at our site and returned.

Do you coat the glass or the seats on a Tesla?

On Teslas we follow the owner manual: side and rear glass can be coated; we leave the front windscreen untreated so the camera view is never affected, and we don't apply seat protectants. Glass and interior options are confirmed per model and year at booking.

Does coating, film or tint affect the Tesla warranty?

They are surface treatments on the paint and glass. None of the work touches the drivetrain, battery, charging hardware or software, and nothing is drilled, removed or rewired.

Do you also do tint, PPF or home chargers?

Yes. Ceramic coating is done at your place. Tint is taken as an advance enquiry: roughly early November, exact date and capacity to be confirmed; we'll contact you to confirm. Home-charger installation happens at your switchboard by licensed electricians, and PPF is our concierge service: we collect your car, film it at our site and return it. EV wrap and servicing are opening next.

Protect what powers you.
Instant on-screen quote · reply within 2 business hours · 7am–5pm Mon–Sat · Brisbane AU
Call 0413 249 610
or email info@evautospecialists.com.au